• Home
  • Project
    • History
    • Progress
    • Hanford Site Stabilization Agreement
  • People
    • My Mission
    • Careers
  • Safety
    • Nuclear Safety & Quality Culture
    • Safety Resources
  • FAQ
  • Newsroom
    • News Releases
    • Fact Sheets
    • Newsletters
    • Photos
    • Contacts
  • Suppliers
    • Qualification Process
    • Supplier Quality
    • Business Resources
    • Networking Events
    • Supplier FAQ
header_23

Bid Lists

The information you provide via the pre-qualification process page will be utilized to assess your company's general capability. Project specific criteria directly identifiable to numbered material/service requisitions may also be required via the opportunities page. This Project specific criteria may include specific go/no-go requirements and may also include requirements supplemental to any of the general categories. While the WTP Project seeks to maximize the use of competition for most project subcontract/purchase opportunities the completion of the general and project specific pre-qualification process does not guarantee participation in any RFP.

Full and open competition on the WTP Project is not required. However, the WTP Project seeks to ensure a sufficient number of pre-qualified firms meeting the general and project specific criteria are invited to bid in order to provide for an adequate level of competition for each RFP. The determination of the adequate level of competition (final list of participants) is at the sole discretion of the WTP Project team. Subsequent to WTP Project Team approval of the final list, RFPs will be made available on an Invitation ONLY basis.

This BID LIST page is a tool for Lower-Tier Suppliers/Subcontractors (Not Prime Suppliers/Subcontractors) to obtain information on who is on the Approved WTP Bidders List for each numbered MR. The purpose of this information is to allow Lower-Tier Suppliers/Subcontractors the option to contact those Bidders for networking and potential business opportunities.

The Bid Lists are not Master Project Bid Lists for the commodity indicated on each Bid List - they are however the Approved Bid List for the stated MR Number. If your company is not on the Approved Bid List for a particular MR it could be for a number of reasons (i.e. your company has not registered or was not registered at the time this bid list was prepared and approved; it was determined that more qualified companies were available;  and the Buyer determined that an adequate number of companies has already been identified for that MR)

Bidders lists are being developed on an ongoing basis and additional Suppliers/Subcontractors are being considered as the project develops. For each commodity there are, in many cases, a quantity of MR's required to complete the Project scope of work for that commodity.

Procurement Suspect/Counterfeit Items Program

Bechtel is committed to effective controls for the prevention, detection, and disposition of Suspect/Counterfeit Items (S/CI) to mitigate any potential safety threat in the operating complex.

The underlying principle in procurement is that suppliers demonstrate they are capable of delivering items conforming to specified requirements.

Suppliers are required to assure that suspect or counterfeit materials are not provided as part of the Material or Product for delivery under any agreement pertaining to the WTP project.

Bechtel will inspect material for attributes common to S/CI by personnel who are trained to recognize S/CI. All S/CI discovered are the Supplier's responsibility and must be replaced with items free from any suspect or counterfeit condition.

Please familiarize yourself with the Project Training Manual on Suspect/Counterfeit Items Awareness (3mb).

Point of Contact: Mary Belkle

NDE Testing Services - 03.09.2012

24590-QL-FSR-NE00-00033

Bid List

Potential Bidder Address Contact Phone E-Mail
Areva Federal Services 2101 Horn Rapids Road - Richland, WA 99354 Mike Bemski 509 371-1858 mike.bemski@areva.com
Advanced Inspection Technologies 19010 Doerre Road, Spring, TX 77379 Jim Halley 832 675-7369 jhalley@aitechnologies.biz
Applied Technical Services 1049 Triad Court, Marietta, GA 30062 Don Councill 305 505-9514 doncouncill@atslab.com
Nielsen Inspection PO Box 735, Gardendale, TX 79758 Paul Nielsen 432 366-1200 p.nielsen@nielseninspection.com
Team Industrial Services 200 Hermann Drive, Alvin, TX 77511 Kurt Hand 219 746-8380 kurt.hand@teaminc.com
Vulcan Products Company 6210 234th Street SE, Woodinville, WA 98072 Mike Russell Jr. 425 806-6000 sales2@vulcanproducts.com
General Electric Intl 1211 Kona Drive, Rancho Dominguez, CA 90220 Johnny Fling 310 635-2700 johnny.fling@ge.com
NorthWest Inspection 615 N Kellogg Street, Kennewick, WA 99336 Tony Martin 509 783-2308 contact@nwinspectioninc.com
Anatec International 187 Avenida La Pata, San Clemente, CA 92673 Jeff Devers 501 366-0334 jdevers@lmttest.com
Quality Inspection Services 37 Franklin Street #400, Buffalo, NY 14202 Adam Purtell  716 853-2611 contact.buffalo@applusrtd.com
WesDyne International I-70 Madison Exit Gate D, Madison, PA 15663 Bart Drennen 860 731-1683 drennebe@westinghouse.com
BRL Consultants 503 W Rhapsody #A, San Antonio, TX 78216 Bryan Lancon 210 341-3442 bryan@brlconsultants.com
Fluid Controls and Components 3095 Kingsgate Way, Richland, WA 99354 John Watson 509 375-0774 john@fluidcontrols.net
Zuuk International 3567 Meeting Street Road, North Charleston, SC 29405 Erin Hill 843 414-8500  ehill@zuukmail.com
Furmanite America 7820 S 196th Street, Kent, WA 98032 Jim Payment 800 932-8010 jpayment@furmanite.com
Omega Technical Services 100 Europia Avenue, Oak Ridge, TN 37830  Eric Papa  865 392-9093 epapa@omegatechserv.com


 

<< Back to Business Opportunities


The scope of the services provided by Bechtel National, Inc. and Washington Group International, Inc.(WGI) include the design, construction, and start up of the Waste Treatment and Immobilization Plant (Vit Plant).

HOME | CONTACT | CAREERS | SITE INDEX

U.S. Department of Energy Office of River Protection. © 2007 - 2012 Bechtel National, Inc. All Rights Reserved.